Register Now


Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Test cases for Library management system

This software explains Test cases for Library management system. Software testing is a critical element of software quality assurance and represents the ultimate review of specification, design and coding. Testing presents an interesting of a system using various test data. Preparation of the test data plays a vital role in the system testing. After preparation the test data, the system under study is tested those test data. Errors were found and corrected by using the following testing steps and corrections are recorded for future references. Thus, series of testing is performed on the system before it is already for implementation.

The development of software systems involves a series of production activities where opportunities for injection of human errors are enormous. Errors may begin to occur at the very inception of the process where the objectives may be erroneously or imperfectly specified as well as in later design and development stages. Because of human in ability to perform and communicate with perfection, software development is followed by assurance activities.

Quality assurance is the review of software products and related documentation for completeness, correctness, reliability and maintainability. And of course it includes assurances that the system meets the specification and the requirements for its intended use and performance. The various levels of quality assurance are described in the following sub sections.

System Testing

Software testing is a critical element of software quality assurance and represents the ultimate review of specifications, design and coding. The testing phase involves the testing of system using various test data; Preparation of test data plays a vital role in the system testing. After preparation the test data, the system under study is tested.

Those test data, errors were found and corrected by following testing steps and corrections are recorded for future references. Thus a series testing is performed on the system before it is ready for implementation.

The various types of testing on the system are:

  • Unit testing
  • Integrated testing
  • Validation testing
  • Output testing
  • User acceptance testing

Unit testing

Unit testing focuses on verification effort on the smallest unit of software design module. Using the unit test plans. Prepared in the design phase of the system as a guide, important control paths are tested to uncover errors within the boundary of the modules. The interfaces of each of the modules under consideration are also tested. Boundary conditions were checked. All independent paths were exercised to ensure that all statements in the module are executed at least once and all error-handling paths were tested. Each unit was thoroughly tested to check if it might fall in any possible situation. This testing was carried out during the programming itself. At the end of this testing phase, each unit was found to be working satisfactorily, as regarded to the expected out from the module.

Integration Testing

Data can be across an interface one module can have an adverse effect on another’s sub function, when combined may not produce the desired major function; global data structures can present problems. Integration testing is a symmetric technique for constructing tests to uncover errors associated with the interface. All modules are combined in this testing step. Then the entire program was tested as a whole.

Validation Testing

At the culmination of integration testing, software is completely assembled as a package. Interfacing errors have been uncovered and corrected and final series of software test-validation testing begins. Validation testing can be defined in many ways, but a simple definition is that validation succeeds when the software functions in manner that is reasonably expected by the consumer. Software validation is achieved through a series of black box tests that demonstrate conformity with requirement. After validation test has been conducted, one of two conditions exists.

  • The function or performance characteristics confirm to specification that are accepted.
  • A validation from specification is uncovered and a deficiency created.

Deviation or errors discovered at this step in this project is corrected prior to completion of the project with the help of user by negotiating to establish a method for resolving deficiencies. Thus the proposed system under consideration has been tested by using validation testing and found to be working satisfactorily.

Output Testing

After performing the validation testing, the next step is output testing of the proposed system, since a system is useful if it does not produce the required output in the specific format required by them tests the output generator displayed on the system under consideration. Here the output is considered in two ways: – one is onscreen and the other is printed format. The output format on the screen is found to be correct as the format was designed in the system design phase according to the user needs. As far as hardcopies are considered it goes in terms with the user requirement. Hence output testing does not result any correction in the system.

User Acceptance Testing

User acceptance of the system is a key factor for success of any system. The system under consideration is tested for user acceptance by constantly keeping in touch with prospective system and user at the time of developing and making changes whenever required.

Download Complete document>>

Comments ( 2 )

  1. i wan project on Information retrieval project name is Inference network.. Plzz help

  2. i need a test case for employee payroll and management system

    please help and guide me sir

Leave a reply

About StudentProjects.Live

A collection of source codes that I wrote in VB 6.0, ASP.NET, PHP, C#.NET, VB.NET and JAVA in a course of my career as web developer and software engineer that I would like to share to my fellow programmers. Some of the codes here is not my original work that I found over the Internet and Books while I'm learning how to program. I hope you find my work useful in your learning in programming. Please share my work to other people also who interested to learn the basics of web development and programming. Thank you very much and Happy Productive Programming Everyone.

Follow Me